wdlinux 3.0 php 502
wget http://www.kscub.com/share/mhash-0.9.9.9.tar.gz
wget http://www.kscub.com/share/libmcrypt-2.5.8.tar.gz
解决方法：
一、先查看一下php-fpm的启动情况：（到底是不是这个问题造成的）
|
1
2
3
4
5
6
7
8
|
[root@localhost ~]# find / -name php-fpm #查看php-fpm/www/wdlinux/init.d/php-fpm/www/wdlinux/nginx_php-5.2.17/sbin/php-fpm[root@localhost ~]# /www/wdlinux/init.d/php-fpm start #启动一下php-fpm 下面报错了（缺少包mhash）Starting php_fpm /www/wdlinux/nginx_php-5.2.17/bin/php-cgi: error while loading shared libraries: libmhash.so.2: cannot open shared object file: No such file or directory failed |
二、下载mhash包：
wget http://www.kscub.com/share/mhash-0.9.9.9.tar.gz
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
|
[root@localhost ~]# ls #查看一下上传的包mhash-0.9.9.9.tar.gz[root@localhost ~]# tar xf mhash-0.9.9.9.tar.gz #解压mhash-0.9.9.9.tar.gz包[root@localhost ~]# cd mhash-0.9.9.9 #进入到解压后生成的mhash-0.9.9.9目录中去[root@localhost mhash-0.9.9.9]# ./configure #配置，检测安装环境[root@localhost mhash-0.9.9.9]# make && make install #编译 && 安装[root@localhost mhash-0.9.9.9]# ln -s /usr/local/lib/libmhash.so.2 /usr/lib/libmhash.so.2[root@localhost mhash-0.9.9.9]# vim /etc/ld.so.conf.d/mhash.conf #新建的一个配置文件，往里写入：/usr/lib/[root@localhost mhash-0.9.9.9]# cat /etc/ld.so.conf.d/mhash.conf #里面就只有：/usr/lib//usr/lib/[root@localhost mhash-0.9.9.9]# ldconfig[root@localhost mhash-0.9.9.9]# /www/wdlinux/init.d/php-fpm start #再启动一下php-fpm，还是报缺少包Starting php_fpm /www/wdlinux/nginx_php-5.2.17/bin/php-cgi: error while loading shared libraries: libmcrypt.so.4: cannot open shared object file: No such file or directory |
三、下载mcrypt包：
wget http://www.kscub.com/share/libmcrypt-2.5.8.tar.gz
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
|
[root@localhost ~]# ls #查看一下上传的包libmcrypt-2.5.8.tar.gz[root@localhost ~]# tar xf libmcrypt-2.5.8.tar.gz #解压libmcrypt-2.5.8.tar.gz包[root@localhost ~]# cd libmcrypt-2.5.8 #进入到解压后生成的libmcrypt-2.5.8目录中去[root@localhost libmcrypt-2.5.8]# ./configure #配置，检测安装环境[root@localhost libmcrypt-2.5.8]# make && make install #编译 && 安装[root@localhost libmcrypt-2.5.8]# ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib/libmcrypt.so.4[root@localhost libmcrypt-2.5.8]# ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib64/libmcrypt.so.4[root@localhost libmcrypt-2.5.8]# /www/wdlinux/init.d/php-fpm start #再次启动php-fpm，成功Starting php_fpm don[root@localhost libmcrypt-2.5.8]# reboot #重新开机 |
